PC05Y+ 3x16A / 3-phase

 878,40 1.378,60

METRON PC05Y+ is very compact & light weight  3-phase / 11 kW  SMART portable EV charger designed to safely charge electric vehicles from any household or industrial socket.

Ready for wireless DYNAMIC LOAD MANAGEMENT (DLM) via additional METRON Wireless Dynamic EV Charging Unit (model 3FD-3).

   User manual – ENG

Get a DISCOUNT: purchase 3FD-3 Wireless Dynamic EV charging unit and PC05+ for reduced price!


Main features:

  • ALL-IN-A PLUG design – NO bulky box on the cable
  • 100% in-house developed miniature SMART vehicle communication module inside (Micro EVSE 4+)
  • Designed for 3-phase and 1-phase Mode 2 EV charging with currents up to 3x16A
  • WiFi access point with preloaded METRON Charge Control application (user can set charging power, solar surplus charging, see real time charging power & energy, house power, solar power, connect to WiFi network,…)
  • OTA (over-the-air) updates (via WiFi) for Charge Control application
  • Ready for wireless DYNAMIC LOAD MANAGEMENT (DLM) via additional METRON Wireless Dynamic EV Charging Unit (model 3FD-3) for protecting main house fuses, adding solar power plant power to maximise charging power/speed and “green” solar surplus charging (special Metron proprietary Dynamic Power Control System algorithms inside)
  • Integrated self-resettable over-temperature protection with SOFT-OFF capability
  • Built-in RCD (30mA AC + 6mA DC) with automatic self-test for maximum user safety
  • PREMIUM quality EV cable used (Made in Germany)
  • Selectable cable lengths from 3m to 30m
  • 100% all weather proof (IP67)

SPECIAL feature:

In case of using the SMART PORTABLE CHARGER(s) on 2 or more different places (e.g. you have 2 houses) it is possible to install the 3FD-3 WIRELESS DYNAMIC EV CHARGING UNITS on 2 or more different locations (e.g. 2 houses) with different main fuses and then just move/use the same SMART PORTABLE CHARGER on those different locations and have everywhere safe wireless FUSE protection DYNAMIC charging. The SMART PORTABLE CHARGER connects AUTOMATICALLY to the 3FD-3 unit at every location.

Cable properties * :

  • Resistant to microbes, oil, dust and water
  • Special cable design for long service life
  • Flexible at low temperatures (fully flexible temp. range: -25°C to 80°C)
  • Withstands high mechanical stress, in particular abrasion and sliding demands

[*] Applies to the insulated cable part only, not the electronics


Technical Specifications:

  • Plug Type (EV Side): Type 2 (IEC 62196) Female Plug
  • Wall Plug Type (grid side): CEE 16A (3-phase/3P N E)
  • Max. Charging Current: 3x16A (3-phase) or 1x16A (single phase – using appropriate adapter)
  • Charging current can be adjusted by front button: 6A, 8A, 10A, 13A or 16A (no smart phone needed)
  • Charging current can be adjusted by slider in Charge Control app. by 1A from 6A to 16A (smart phone needed)
  • Max. Charging Power (single/three phase): 3,7 kW/11 kW
  • Rated Voltage (single/three phase): 230/400V
  • Operating voltage range (single/three phase): from 90V/155V to 270V/470V (50/60Hz)
  • Idle power consumption: 4 W
  • Micro EVSE 4+ in-house developed FULL feature vehicle communication module inside
  • User info via 2 blue LED lights (basic) and Charge Control app. (advanced)
  • Supports OTA (over-the-air) uploads of future versions of Charge Control application firmware
  • Supported WiFi standards: IEEE 802.11b/g/n
  • WiFi speed: up to 150 Mbit/s
  • WiFi security: WPA2
  • WiFi signal range: up to 20 m
  • Allows connecting the portable charging station to local WiFi network and also set the charging station internet access in the WiFi router (advanced users)
  • Detects/indicates ALL normal charging states (via blue status LED)
  • Detects/indicates ALL faults (via blue status LED)
  • Auto recovers from any fault except ground fault
  • Built-in ground fault protection device – RCD (30mA AC + 6mA DC) for maximum user safety
  • Built-in automatic RCD self-test
  • Built-in power contactor weld detection system
  • Wall plug integrated OVER-TEMPERATURE PROTECTION (on request)
  • Operating Ambient Air Temperature Range: -30 °C to 50 °C (at full sun exposure)
  • Integrated self re-settable over-temperature protection with SOFT-OFF capability
  • IP Rating: IP67 (100% all weather proof )
  • IK rating: IK10 (impact/shock proof) + drive-over proof
  • UV resistant
  • Cable Color: Black or Orange
  • Cable Length: customer defined
  • Weight: depends on cable length
  • IEC 61851 compliant
  • CE approved
  • Warranty: 2 years

Green production

All our products are produced in a carbon neutral way by using “Sustainable energy cycle” method. Production plant where we make charging cables and portable charging stations is the first fully sustainable production facility for EV charging cables. All energy, needed for the heating and cooling of the building, production process and for transportation of goods and employees (except deliveries of heavy materials by trucks), is produced by 2 photovoltaic power plants and stored in 4 storage batteries. Almost all of the raw materials we use (cables, plugs) are produced in EU, to shorten supply routes and support local economy. Buying our products helps developing sustainable economy.


100% compatible with all electric vehicles.


RCD is an acronym for Residual Current Device – sometimes it can be called also Earth Leakage Circuit Breaker or Safety Switch. Its purpose is to prevent you from getting a fatal electric shock if you touch live part, such as a bare copper wire under high voltage. RCDs offer a level of personal protection that ordinary fuses/circuit-breakers cannot provide. RCD constantly monitors the electric current flowing through one or more circuits which it protects. If it detects electricity flowing down an unintended path, such as through a person who has touched a live part, the RCD will switch the circuit off very quickly, significantly reducing the risk of death or serious injury. Every portable charging station has integrated Type A 30mA AC + 6mA DC RCD what ensures maximum possible level of personal protection as it protects users from AC, pulsating DC and pure DC leakage currents.


  1. This portable charger (portable charging station) is designed to work also with Renault ZOE (all motor versions are supported) what means Renault ZOE won’t damage this portable charger – won’t weld internal contactors!
  2. Before charging starts Renault ZOE’s on-board charger system checks if the wall socket from which you want to charge the car is correctly connected to a GOOD electrical grid otherwise ZOE won’t start charging. The wall socket/grid must have the following characteristics:
  • Phase sequence in wall socket must be in clockwise rotation (L1-L2-L3). If the wall socket phase sequence is L3-L2-L1 (counterclockwise) some Zoe versions won’t charge! To check phases and phase sequence you can use our PHASE TESTER device.
  • Electrical grid behind wall socket must have low impedance (cables with conductor cross sections must have at least 2.5mm2)
  • Earthing/grounding: earth resistance should be less than 100 Ohm
  • The voltage difference between neutral and earth should be very low (if this is a problem it can be solved by experienced electrician in the way neutral and earth are connected together in a wall socket if there is no RCD protection in the building or before RDC protection device if it exists)
  • Wall socket RCD (Ground fault protection) device must be Type A (30mA) or Type A with added 6mA DC RCD or Type B. RCD Type AC (30mA) is not appropriate, because it can be activated by Renault ZOE charging system!
  • When charging at single phase (using CEE to schuko adapter) it is important that phase and neutral are correctly positioned. If it doesn’t work turn schuko domestic plug by 180 deg. and it will (most likely) work.

Exclusive products

Special category of products