PC04A – 32A / 1-phase

 422,12 988,20

PORTABLE EV CHARGER for charging electric vehicles with Type 2 sockets from any standard home or public wall socket (230V power source) – supports charging with currents up to 32A (up to 7.4 kW charging power).


   User manual – ENG    Bedienungsanleitungen – DE
   Upute za uporabu – HR    Istruzini d’uso – ITA

NOTE: In case you choose the vesion without RCD, it is allowed to use it exclusively on the installations protected by RCD [1]


Main features:

  • ALL-IN-A PLUG design – NO bulky box on the cable
  • 100% in-house developed miniature FULL feature vehicle communication module (Micro EVSE 1)
  • Designed for 1-phase Mode 2 EV charging with currents up to 32A
  • Charging current can be changed even during charging process
  • Integrated self-resettable over-temperature protection with SOFT-OFF capability
  • PREMIUM quality EV cable used (Made in Germany)
  • Selectable plug type (wall socket/grid side)
  • Selectable cable lengths from 5m to 12m
  • Optional RCD protection Type B integrated inside CEE 32A (3-phase/3P N E) wall plug – still NO bulky box anywhere!

Cable properties * :

  • Resistant to microbes, oil, dust and water
  • Special cable design for long service life
  • Flexible at low temperatures (temp. range: -25°C to 80°C)
  • Withstands high mechanical stress, in particular abrasion and sliding demands

[*] Applies to the insulated cable part only, not the electronics


Technical Specifications:

  • Plug Type (EV Side): Type 2 (IEC 62196) Female Plug
  • Plug Type (wall socket/grid side): customer defined (CEE 32A (3-phase/3P N E), CEE 32A (1-phase/2P E),….)
  • Max. Charging Current: 32A (single phase)
  • Charging current can be adjusted: 6A, 8A, 10A, 13A, 16A, 20A, 25A or 32A
  • Selected charging current stays stored in internal memory even when disconnected from the socket (power) 
  • Max. Charging Power: 7.4 kW
  • Rated Voltage: 230V (single phase)
  • Operating voltage range: from 180V to 270V (50/60Hz)
  • Idle energy consumption: 7 Watt (EVSE and RCD)
  • Micro EVSE 1 inside EV plug – in-house developed FULL feature vehicle communication module
  • Ultra accurate and temperature independent QUARTZ controlled EV communication frequency  
  • User info via Blue LED light
  • Detects/indicates ALL normal charging states (via Blue LED)
  • Detects/indicates ALL faults (via Blue LED)
  • Auto recovers from any possible fault !
  • Cable Length: customer defined
  • UV, oil and flame resistant cable insulation
  • Operating Ambient Air Temperature Range: -30 °C to 40 °C (at full sun exposure)
  • Integrated self re-settable over-temperature protection with SOFT-OFF capability
  • Optional CEE 32A (3-phase/3P N E) wall plug with integrated RCD protection Type B (AC & DC current sensitive – ensures maximum possible safety)
  • IP Rating: IP54 (rain water resistant)
  • Cable Color: Orange
  • Weight: depends on cable length
  • 100% compatible with all electric vehicles that have Type 2 sockets (For example: VW e-Golf, BMW i3, Tesla Model S, Smart ForTwo ED, Mercedes B-Class Electric Drive, Mercedes S500 PHEV, Mercedes SLS EV, Mercedes Vito E-Cell Van, Porsche Panamera S PHEV, BYD e6, Renault Zoe, Volvo V60 PHEV, BMW i8, Audi A3 e-Tron, VW E-Up, VW Golf GTE, VW Passat GTE and many others)
  • IEC 61851 compliant
  • CE approved
  • Warranty: 2 years


TESLA MODEL S: depending on your on-board charger, charging with this portable charging station may be limited to 16A max

RCD: A residual-current device (RCD), or residual-current circuit breaker (RCCB), is a device that quickly breaks an electrical circuit to prevent serious harm from an ongoing electric shock. Injury may still occur in some cases, for example if a human falls after receiving a shock, or if the person touches both conductors at the same time

Exclusive products

Special category of products