PC03T – 16A / 1-phase

 436,76 664,90

PORTABLE EV CHARGER for charging TESLA electric vehicles with Type 2 charging sockets from any standard home or public wall socket (230V power source). Supports 1-phase charging with currents up to 16A (up to 3,7 kW charging power).

Integrated two “must-have” Tesla only features (same as present on Tesla Superchargers and Destination chargers):

  1.  Remote charge port opener
  2.  Charging plug unlocker

Compatible with European versions of TESLA Model 3, Model S and Model X electric vehicles.

NOTE: If you have chosen the version without RCD, use of this device is allowed exclusively on installations protected by RCD [1]. If you have opted for a industrial CEE plug, please kindly describe in order notes (at check-out), which type of plug you wish to have (1-phase or 3-phase plug).

   User manual – ENG



Main features:

  • ALL-IN-A PLUG design – NO bulky box on the cable
  • 100% in-house developed miniature FULL feature vehicle communication module (Micro EVSE 2)
  • Designed for 1-phase Mode 2 EV charging with currents up to 16A
  • Integrated Tesla remote charging port opener and plug unlocker
  • Integrated self re-settable over-temperature protection with SOFT-OFF capability
  • Optional Schuko wall plug over-temperature protection with SOFT-OFF capability and automatic reset
  • PREMIUM quality EV cable used (Made in Germany)
  • Choose preferred plug type (wall socket/grid side)
  • Choose desired cable lengths from 5m to 12m, on demand up to 25m

Cable properties * :

  • Resistant to microbes, oil, dust and water
  • Special cable design for long service life
  • Flexible at low temperatures (fully flexible temp. range: -25°C to 80°C)
  • Withstands high mechanical stress, in particular abrasion and sliding demands

[*] Applies to the insulated cable part only, not the electronics


Technical Specifications:

  • Plug Type (EV Side): Type 2 (IEC 62196) Female Plug
  • Plug Type (wall socket/grid side): customer defined (Schuko – Type F, CEE, Type G, Type H,….)
  • Max. Charging Current: 16A (single phase)
  • Charging current can be adjusted: 6A, 8A, 10A, 13A or 16A
  • Selected charging current stays stored in internal memory even when disconnected from the socket (power) 
  • Max. Charging Power: 3.7 kW
  • Rated Voltage: 230V (single phase)
  • Operating voltage range: from 180V to 270V (50/60Hz)
  • Micro EVSE 2 inside EV plug – in-house developed FULL feature vehicle communication module
  • Ultra accurate and temperature independent QUARTZ controlled EV communication frequency  
  • User info via Blue LED light
  • Detects/indicates ALL normal charging states (via Blue LED)
  • Detects/indicates ALL faults (via Blue LED)
  • Auto recovers from any possible fault !
  • Cable Length: customer defined
  • UV, oil and flame resistant cable insulation
  • Operating Ambient Air Temperature Range: -30 °C to 40 °C (at full sun exposure)
  • Integrated self re-settable over-temperature protection with SOFT-OFF capability
  • IP Rating: IP54 (rain water resistant)
  • Cable Color: Black or Orange
  • Weight: depends on cable length
  • IEC 61851 compliant
  • CE approved
  • Warranty: 2 years

Optional features:

  • SCHUKO plug (Type F) with integrated OVER-TEMPERATURE PROTECTION
    • Ensures SAFE charging with high currents (16A)
    • Works totally independent
    • Terminates charging in case it gets too hot
    • Over-temperature is indicated via blinking blue LED on EV plug
    • Automatically resumes charging when it cools down
    • How it works: in case of bad quality wall socket that causes excessive heat generation this Schuko plug is able to detect that and disconnect charging. When this happens the blue LED light on the EV plug starts  blinking 5 times (repeating). When everything cools down charging is automatically resumed.
  • Ground fault protection device – 30mA RCD (shall be used if there is no 30mA RCD protection behind the wall socket/in-house electrical installation)


Beside European versions of Tesla Model S, Model X and Model 3 electric vehicles this portable charger is also compatible with all other electric vehicles equipped with Type 2 charging sockets.

What is RCD and how does it work?

RCD is an acronym for Residual Current Device – sometimes it can be called also Earth Leakage Circuit Breaker or Safety Switch. Its purpose is to prevent you from getting a fatal electric shock if you touch live part, such as a bare copper wire under high voltage. RCDs offer a level of personal protection that ordinary fuses/circuit-breakers cannot provide. RCD constantly monitors the electric current flowing through one or more circuits which it protects. If it detects electricity flowing down an unintended path, such as through a person who has touched a live part, the RCD will switch the circuit off very quickly, significantly reducing the risk of death or serious injury.


Metron® is not affiliated with or endorsed by Tesla. It is neither inferred nor implied that products sold by Metron® are authorized by or in any way connected to Tesla. All manufacturer names, symbols, and descriptions used in our images and text are used solely for identification purposes only. Tesla Model S, Model X, Model 3, Supercharger and Destination charger are trademarks of Tesla.

Exclusive products

Special category of products